Learn how to quickly and easily install your DUALUDG-4999 floor heating thermostat. Click “Read More” for details.
Basic Installation and Mounting the WUDG Floor Heating Thermostat Read More »
If you installed your thermostat over 3 years ago and it seems to be functioning the same, however your floor is no longer heating up, call your electrician. Click “Read More” for details.
What if my thermostat says system is on however the floor is not heating up? Read More »
Just because the floor heating system can operate with the included floor sensor probe doesn’t mean that it should. Click “Read More” for important installation notes on this subject.
How important is it to install the floor sensor probe? Read More »
After getting a “Ground Fault” error on your thermostat you may find out your heating system resistance reading are off. Click “Read More” to learn why.
Why are my floor heating system resistance readings not the same after several years? Read More »
If you installed your UCCG floor heating thermostat over 3 years ago and it seems to be functioning the same, however your floor is no longer heating up, call your electrician. Click “Read More” for details.
This error could indicate several different issues. Click “Read More” for details.
NO: cable must be embedded in thin-set or self-leveling compound. Once dry, the floating wooden floor will be installed on top. Alternatively, select the FOIL heating mats which can be installed without thin set.
Can I install a wooden floating floor directly on top of the cable ? Read More »
You can stick the insulation boards to the concrete slab using regular modified or pre-mixed thin set. We recommend a 1/4 x 1/4” trowel.
What kind of adhesive do I use with Ultralight? Read More »
Primers help encapsulate dust to improve bonding with the thinset you’d apply to lay the boards. But on brand new or clean subfloors this may not be necessary. When in doubt, consider a solvent-free floor primer like Ardex P51 or Mapei SM. If your subfloor is not level or has a lot of residues, such as glue remnants from an old vinyl floor recently removed, you may need to apply a thin coat of leveler to smoothen the subfloor in preparation for your project.
What kind of primer do I use with ultralight? Read More »
You can stick the insulation boards to the concrete slab using regular modified or pre-mixed thin set. We recommend a 1/4 x 1/4” trowel.
Do I need to prime the subfloor before installing Ultralight? Read More »
Warmup offers an extensive range of electric floor systems compatible with all floor types, rooms and projects.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)
