Home
/
Programming
/
EZPT Easy Programmable Thermostat
How to Change the Sensor Application on your EZPT Thermostat
If you would like to swap your EZPT Thermostat’s sensor control between floor and room, you can easily do so through the “Installer Settings” menu.
Video Instructions
The video below will visually walk you through the process of changing the Sensor Application on your EZPT Thermostat:
Written Instructions
What is the purpose of the Sensor Application function on my thermostat?
The Sensor Application function allows you to choose which sensor your thermostat uses to control your underfloor heating system. There are 3 options: Floor, Room, and Room/Floor Protection.
- Floor: Controls the heating system based on the floor sensor connected to the thermostat.
- Room: Controls the heating system based on the thermostat’s internal air sensor.
- Room/Floor Protection: Uses the thermostat’s internal air sensor but is restricted by a floor temperature limit, which can be set in the Floor Protection Installer Setting.
The option you choose is mostly a personal preference. However, if you are receiving a Floor Sensor Error on your thermostat, it may be necessary to use the “Room” option.
The thermostat will be set to “Floor” by default.
How do I change the Sensor Application on my thermostat?
To change the Sensor Application on your thermostat, start by pressing the “Edit” button at the bottom of the screen. Then, press “Installer Settings.”
In the “Installer Settings” menu, press “Sensor Application.”
On this screen, press the control option that you would like to use to select it, then press the check mark button in the bottom left to confirm the setting.
Use the back arrows in the top left of the screen to return to the main page.
Contact Us for Further Assistance
For more EZPT Instructional Videos, check out our playlist on YouTube. Refer to this page on our website for more step-by-step instructions on using your thermostat.
If you have any additional questions or concerns, please don’t hesitate to reach out to us. Our support team is available to assist you and address any inquiries you may have. To access our support services, simply call us at (888) 927-6333.
