Home
/
Programming
/
EZPT Easy Programmable Thermostat
How to Use the Open Window Function on your EZPT Thermostat
You can turn on the Open Window Function on your EZPT Thermostat through the “Installer Settings” menu to increase your underfloor heating system’s efficiency.
Video Instructions
The video below will visually walk you through the process of using the Open Window Function on your EZPT Thermostat:
Written Instructions
What is the purpose of the Open Window Function on my thermostat?
When the Open Window Function on your thermostat is on, it will detect any sudden drops in temperature in a room, typically caused by cold air from outside coming in through a window.
When a drop in temperature is detected, the thermostat will temporarily stop heating the floor in order to save energy.
How do I use the Open Window Function on my thermostat?
To use the Open Window Function on your thermostat, start by pressing the “Edit” button at the bottom of the screen. Then, press “Installer Settings.”
In the “Installer Settings” menu, press “Open Window.”
On this screen, toggle the switch to ON to activate the Open Window Function. Then, press the check mark button in the bottom left to confirm the setting.
Use the back arrows in the top left of the screen to return to the main page.
Contact Us for Further Assistance
For more EZPT Instructional Videos, check out our playlist on YouTube. Refer to this page on our website for more step-by-step instructions on using your thermostat.
If you have any additional questions or concerns, please don’t hesitate to reach out to us. Our support team is available to assist you and address any inquiries you may have. To access our support services, simply call us at (888) 927-6333.
