Easy to install, take the time to review the installation procedure for the best results. Always use a licensed electician. Click “Read More” for instructions.
Installation of the TH115 Floor Heating Thermostat Read More »
Welcome to our guide on testing the resistance of floor heating system wires using a digital multimeter. To ensure that your floor heating system will function properly, always test the resistance of your wires with a digital multimeter set to 200 ohms before, during and after installation. Let’s dive into the steps of how to check the resistance readings of your electric floor heating system to help you get started.
How to Check the Resistance Readings of your Electric Floor Heating System Read More »
The WIB boards will save you money by acting as a very efficient thermal barrier. Heats up times in our testing facility were cut down from 2.5 hrs. to just 25 minutes. With a 78% fast ramp-up time, your system will save you 71% in electrical usage.
Learn about “R” Value of the Warmup Insulation Boards Read More »
The 120V coil of the WSM-63 is powered between the one leg of 240VAc and a neutral they. Do NOT run both hots to the WSM-63. Please refer to the installation manuals for further information.
How do I wire my WSM-63 to my DS2 controller? Read More »
Change the Settings on Your WSM-63 Controller The three dials around the large timer dial on the WSM-63 allow you to change the settings of the controller. A → Yellow LED: Power ON (U) B → Red LED: Timing in progress (C) C → Unit of time selected D → Time scale selector E →
What are the Three Setting Dials around the Large Timer on the WSM-63? Read More »
The California Title 24 Building Energy Efficiency Standards are designed to ensure new and existing buildings achieve energy efficiency and preserve outdoor and indoor environmental quality. We have included below useful information regarding underfloor heating and Title 24. To ensure compliance, please consult with a building professional.
Does Warmup Underfloor Heating Comply with Title 24? Read More »
To connect, please make sure you have downloaded the Alexa App and that your Amazon device is fully registered and connected to the Wi-Fi. In addition, you will need to make sure that your my.warmup.com account has been set up and your 4iE is connected. Once connected, open the app and go to the Skills in the menu. Find the skill Warmup 4iE and select Enable.
Can my thermostat connect to Alexa? Read More »
The Warmup DCM-PRO or StickyMat system may be used under carpet tiles as long as it is embedded in latex based modified polymer self-leveling compound prior to the installation of the carpet tiles.
Can I Install a Warmup System Under Carpet Tiles? Read More »
So either the installer puts a DIN rail on the wall or cabinet, or they can utilize the four mounting holes in the corners of the housing and screw it to a surface.
How do I Mount my ETO2 Controller? Read More »
Follow these steps to turn off the backlight feature: Menu > Settings > Display/Audio > Display Brightness > Standby set to ‘0’ > Accept
How do I turn off the Backlight on my 4iE Thermostat? Read More »
Warmup offers an extensive range of electric floor systems compatible with all floor types, rooms and projects.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)
