Your 3IE allows the ability to temporarily change the floor temperature setting for a specific period of time. You will first need to “wake” your thermostat by touching the checkmark on the front screen. Notice that above the up and down arrows you see “override.” Touch either arrow to begin adjusting the target temperature that currently appears.
3iE Making Temporary Temperature Adjustments Read More »
The picture below shows the screen you will see if you are in the “Program Schedule” screen. If you had selected the option of “View/Edit” a program, you would have to start in that particular menu to eventually reach menu now being referenced.
3iE Basic temperature programming/Setting each day separately Read More »
If for some reason you need to change the time, do the following. Touch check under “wake.” Now the word “menu” will appear above the check. Touch it to begin. Next, touch the dash next to “settings.” Then, touch dash next to “time.” Touch dash next to “set time.” You will now be on the
3iE Adjusting the time Read More »
Check you are using a WPA2 password format (less than 10 characters) on your network. Click “Read More” for details.
Why Won’t My 4iE Connect to the Internet? Read More »
If your floor temperature reading significantly varies from the actual temperature of the floor, the sensor probe and cold tail lead may be in the same conduit. Putting both in the same conduit can cause interference with the probes temperature reading, which can cause inaccuracies.
Why is my Floor Temperature Reading Incorrect? Read More »
When the LTC is ON, your system will not turn on if temperatures reach or drop below 5°F. When the system is on and senses the temperature drop to 5°F, the system will delay-off.
Why hasn’t my Controller activated my snowmelt system if its snowing? Read More »
If you installed your thermostat over 3 years ago and it seems to be functioning the same, however your floor is no longer heating up, call your electrician. Click “Read More” for details.
The first items on the checklist would be to ensure that the breaker is on and that power is being supplied to the unit. Click” Read More” for details.
What if my TH115 floor heating thermostat is not turning on? Read More »
The ER1 message will also occur if no floor sensor is connected to the thermostat. Have your electrician make sure that the sensor probe wires are securely connected in ports 1 and 2 of the thermostat. If sensor was not installed, your thermostat can be programmed to read the air temperature instead by following the steps below.
What does “ER1” on the thermostat display mean? Read More »
This may also mean that you have not yet registered the actual thermostat under your location as a room. Please make sure you have added a room, which requires you to enter the thermostats unique device number to fully register.
What does the ‘!’ mean on my 4iE Screen? Read More »
Warmup offers an extensive range of electric floor systems compatible with all floor types, rooms and projects.
