Then you will select the days of the week you would like to program to apply for, press ‘accept’ and then add periods of times you would like the system to be on and heating. The following menu will allow you to set times and temperatures. Lock in your program by pressing accept twice.
Programming
First, the device number shows up during the initial startup menu and recommends the number be written down. Secondly, it can always be accessed afterwards on the device itself.
The Warmup SmartGeo is a way to allow your thermostat to combine the location settings on your device, occupancy sensing features and a few algorithms to create the most comfortable heat as efficiently as possible.
Once your profile and 4iE are registered, you can now set up or edit a program through the MyHeating App. Note: You can set multiple different programs for different days. Refer the the video below for further guidance.
There is no battery backup or capacitor in the 4iE, however, there is internal memory. Periodically the programming and date/time are stamped to a section of internal memory. This is then overwritten when the next stamp takes place. When the power is resumed following a power outage, the device will revert to the most recent stamp taken.
This post explains the size requirements of the image file you are trying to upload as a 4iE background.
Take a look at the inside of the DS-5 and preview the setting options available. Click “Read More” for details.
This page will explain the purpose of the LTC Dip Switch and the recommended settings for the most efficient installation.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)