The 4iE thermostat has a lock feature. If you have locked your thermostat and can not get back in, this post will help you!
Programming
This page explains how to wire and program the 4iE thermostat to work with baseboard applications.
First, loosen the screws at the bottom of your unit at shown in the video clip below. Then remove the face of your thermostat by lifting up and off. On the back of the face is a small reset button. Using a small screw driver or writing utensil, press and hold the reset button for 15 seconds. Then place the face of the unit back on making sure the 8 gold pins line up correctly with their counterparts.
The 4iE® Smart WiFi thermostat, and non-WiFi version, learn the heat-up and cool down rates of your home to automatically set the most efficient temperatures when you’re away, reducing usage by up to 25%.
When multiple floor heating systems need to be controlled by one thermostat there are guidelines to follow. Click “Read More” for details.
What do you do when this message appears? Click “Read More” for details.
Change the Settings on Your WSM-63 Controller The three dials around the large timer dial on the WSM-63 allow you to change the settings of the controller. A → Yellow LED: Power ON (U) B → Red LED: Timing in progress (C) C → Unit of time selected D → Time scale selector E → […]
Programming your Warmup Tempo thermostat.
System Power is requested during the initial setup of your device. System power is simply the wattage of the heating system that you connect to your thermostat. To set your systems power select the following: menu > energy monitor > power settings > select the wattage using the up and down arrows > accept.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)