Follow these suggestions related to your power source to ensure excellent performance of your floor heating system. Click “Read More” to learn what to do.
Programming
Warmup 4iE thermostats come with or without WiFi capability. If you have a 4iE with WiFi capability and the home screen shows internet bars with an X above, this indicates that your 4iE internet connection has failed or has not yet been set up. Connecting your 4iE thermostat to WiFi is easy and doing so will allow you to access your thermostat from any location via the My Heating App or My.Warmup.com.
The 4iE® is offered in White & Black. It is designed to look great in both modern and traditionally styled homes, with glass effect front faces and beveled chrome edges to reflect wall colors.The large color touchscreen can be customized with different themes and custom up-loadable photo backgrounds* to complement your wallpaper. There’s even a 7-day local weather forecast built in*. (*WiFi version only)
Your 3IE allows the ability to temporarily change the floor temperature setting for a specific period of time. You will first need to “wake” your thermostat by touching the checkmark on the front screen. Notice that above the up and down arrows you see “override.” Touch either arrow to begin adjusting the target temperature that currently appears.
The picture below shows the screen you will see if you are in the “Program Schedule” screen. If you had selected the option of “View/Edit” a program, you would have to start in that particular menu to eventually reach menu now being referenced.
If for some reason you need to change the time, do the following. Touch check under “wake.” Now the word “menu” will appear above the check. Touch it to begin. Next, touch the dash next to “settings.” Then, touch dash next to “time.” Touch dash next to “set time.” You will now be on the […]
What do you do when this message appears? Click “Read More” for details.
What do you do when this message appears? Click “Read More” for details.
Ground Fault protection is a must, especially with bathroom and other “wet” installations. Are you covered? Click “Read More” for the answer.
The COMMBOX-600 is a “Plug and Play” controlled power distribution panel for frost protection, ice and snow melting projects. When receiving a signal from the sensor(s)m the contactors are activated, energizing your heating system. DIP switch settings determine how the zones activate. When programming your system, make sure DIP switch 1 is in the ON position. The program manual can be navigated by using the SELECT (+) to move forward or SELECT (-) to go back through settings.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)