Subscribe to our YouTube channel here.
Installation
Warmup electric floor heating mats are designed to make installation easy. Take a peek at our brief installation video to see for yourself. Click here to view it. To view a demonstration, watch our video on heating mat installation below.
While you can operate your floor heating system without the floor sensor probe it is better to have it installed. Click “Read More” for detailed information.
The ground wire of the heater(s) must be directly connected to the ground wire of the supply.
Please verify that the circuit can handle the amount of amperage your heating system requires. Your thermostat can only handle up to 15 amps so if you are connecting multiple heaters to one thermostat location, you may need to use a relay and a larger breaker. Your or your electrician can find out the amperage rating of your specific floor heating system in installation manual or printed on the box. Note: Just because the Warmup thermostats are dual voltage, this does not mean you can supply any voltage to your heating system. You must supply the voltage supplied to the voltage of your specific heater.
No, you should never shorten the heating wire. Click “Read More” for details.
Do you have an old Warmup thermostat that you’d like to upgrade to the 6iE? Learn all you need to know in this post.
Find our recommendations for distancing floor heat from walls in this post to ensure a perfect underfloor heating installation.
Looking to terminate a self-regulating cable? This post provides a video demonstration as well as a link to the full instructions.
You should never cross underfloor heating cables. This post will link you to some solutions for avoiding heating cable crossing.