This page explains how to determine which voltage to run to your DCM-PRO heating system.
Wiring
The cold tail lead and the sensor probe should be run in separate conduits. This will prevent any interference from the cold tail lead affecting the temperature readings from the sensor probe.
That floor probe is an important part of having your floor heating system function properly. Click “Read More” for details.
Learn how to wire your 3iE and probe for both 120V and 240V configurations. Always use a licensed electrican. Click “Read More” for details.
Take a look at the wiring configuration of the DS-2C controller. Click “Read More” for details.
Take a look at the wiring configuration of the DS-5. Click “Read More” for details.
Take a look at the wiring configuration of the DS-8. Click “Read More” for details.
The ETOG snow and ice melting ground sensor must be wired to specific terminals inside the ET02 controller. Click “Read More” for details.
Click “Read More” for additional wiring instructions for your roof and gutter snow and ice removal controller.
Uncomplicated wiring instructions for Warmup’s WUDG floor heating thermostat at your fingertips. Always use a licensed electrician.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)