Home
/
Programming
/
EZPT Easy Programmable Thermostat
How to Calibrate the Temperature on your EZPT Thermostat
If the floor or room temperature reading on your thermostat is different from the actual temperature of the floor or room, you can offset the temperature reading through the “Installer Settings” menu.
Video Instructions
The video below will visually walk you through the process of calibrating the temperature on your EZPT Thermostat:
Written Instructions
Floor Temperature Calibration
When to use the Floor Temperature Calibration setting.
The Floor Temperature Calibration setting allows you to offset the floor temperature in the event that there is a discrepancy between the thermostat reading and the actual temperature of the floor.
For example, if the floor temperature on the thermostat is reading 80°F but the actual floor temperature is 75°F, you can calibrate the offset to -5°F so that the thermostat’s read temperature matches the actual temperature.
How to use the Floor Temperature Calibration setting.
To use the Floor Temperature Calibration setting on your thermostat, start by pressing the “Edit” button at the bottom of the screen. Then, press “Installer Settings.”
In the “Installer Settings” menu, press “Floor Temp. Calibration.”
On this screen, use the up and down arrow buttons to adjust the temperature offset and then press the check mark button in the bottom left to confirm the setting.
Use the back arrows in the top left of the screen to return to the main page.
Room Temperature Calibration
When to use the Room Temperature Calibration setting.
The Room Temperature Calibration setting allows you to offset the room temperature in the event that there is a discrepancy between the thermostat reading and the actual temperature of the room.
For example, if the room temperature on the thermostat is reading 80°F but the actual room temperature is 75°F, you can calibrate the offset to -5°F so that the thermostat’s read temperature matches the actual temperature.
How to use the Room Temperature Calibration setting.
To use the Room Temperature Calibration setting on your thermostat, start by pressing the “Edit” button at the bottom of the screen. Then, press “Installer Settings.”
In the “Installer Settings” menu, press “Room Temp. Calibration.”
On this screen, use the up and down arrow buttons to adjust the temperature offset and then press the check mark button in the bottom left to confirm the setting.
Use the back arrows in the top left of the screen to return to the main page.
Contact Us for Further Assistance
For more EZPT Instructional Videos, check out our playlist on YouTube. Refer to this page on our website for more step-by-step instructions on using your thermostat.
If you have any additional questions or concerns, please don’t hesitate to reach out to us. Our support team is available to assist you and address any inquiries you may have. To access our support services, simply call us at (888) 927-6333.
