Home / Installation / DCM-PRO Fleece-Back Membrane

What type of thin set can be used with the DCM-PRO system?

The DCM-PRO Fleece-Backed anti-fracture membrane can be installed on wood and cement subfloors using any tile adhesive. To save time and money, the DCM-PRO Peel-and-Stick anti-fracture membrane can be installed on a plywood subfloor, Warmup insulation board, or concrete subfloor without the use of any adhesive. Installers can use either modified or unmodified adhesives over the membrane to suit their installation needs. Warmup recommends Modified.


Unmodified Thin Set: Without polymer

Modified Thin Set: With polymer


The DCM-PRO Membrane can even be covered with self-leveling mortars (SLU’s) to allow installation of small format tiles and other floor types such as glue-down wood and LVT’s, to be laid on top of the DCM-PRO System.


Tip from Warmup: Leveling compound instructions will confirm if it is suitable for use over plastic/vinyl surfaces. Always confirm this before proceeding.

    Comments are closed.