12 AWG or 18 AWG should be used depending on the distance from the controller. Click “Read More” for details.
Picture
12 AWG or 18 AWG depending on the distance from the controller. Click “Read More” for details.
The amperage capacity of the Resibox is 120A and for the Commbox it is 230 Amps. The Resibox has (4) of the 30A/2-pole contactors rated 120-277V for a total of maximum 120A load capacity. Click “Read More” for details.
The 120V coil of the WSM-63 is powered between the one leg of 240VAc and a neutral they. Do NOT run both hots to the WSM-63. Please refer to the installation manuals for further information.
Change the Settings on Your WSM-63 Controller The three dials around the large timer dial on the WSM-63 allow you to change the settings of the controller. A → Yellow LED: Power ON (U) B → Red LED: Timing in progress (C) C → Unit of time selected D → Time scale selector E → […]
The California Title 24 Building Energy Efficiency Standards are designed to ensure new and existing buildings achieve energy efficiency and preserve outdoor and indoor environmental quality. We have included below useful information regarding underfloor heating and Title 24. To ensure compliance, please consult with a building professional.
The Warmup DCM-PRO or StickyMat system may be used under carpet tiles as long as it is embedded in latex based modified polymer self-leveling compound prior to the installation of the carpet tiles.
So either the installer puts a DIN rail on the wall or cabinet, or they can utilize the four mounting holes in the corners of the housing and screw it to a surface.
Start Wiring your Thermostat by Pulling Power from Terminals 2 and 5 Wiring the WSM-63 and ETO2 together is a great way to be able to control the WSM-63 timer panel with a pavement sensor. Pull the power from Terminals 2 and 5 and input into the L and N on the ETO2 controller. […]
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)