All surfaces should be thoroughly cleaned of all dirt and debris. When installing over an existing concrete base, it is important to remove all traces of existing finishes, contamination, etc. to allow for a clean surface.
Insulation Boards: Preparing for the Installation of Floor Heating Read More »
It is vital that the floor heating thermostat’s floor probe was not only installed but done so the right way. Click “Read More” for details.
Warmup In-slab Floor Heating Cable is designed to be placed within the cement slab of at least 2” (50mm) in thickness, with at least 11/8” (30mm) of the slab above the heating wire. For thicker pour of up to 6”, elevate the wire mesh on which the cable is tied with bricks, wood blocks or other spacers to float the cable at the desired level. Depending on the construction of the subfloor and in general, in order to improve the efficiency of the system, you may need to apply insulation prior to the pour.
Basic Installation of the In-slab Floor Heating Cable Read More »
WIU should be installed with the foil side facing DOWN. Click “Read More” for details.
Should I install the WIU with the foil side up or down? Read More »
Designed specifically to enhance the performance of the Foil Floor Heating Systems. Click “Read More” for installation.
Installation of WIU over various sub-floor types Read More »
This page explains how to extend your lead wire or connect your heater to a thermostat in a remote location.
Can the cold tail lead of your Warmup indoor heating system be extended? Read More »
This page will give you pointers about trimming your cold lead to fit easier in the conduit and electrical box.
Can the lead of your Warmup heating system be trimmed? Read More »
This page explains how to wire and program the 4iE thermostat to work with baseboard applications.
Can baseboard heaters be controlled by the 4iE? Read More »
This page will explain the purpose of the LTC Dip Switch and the recommended settings for the most efficient installation.
What is the purpose of the LTC Dip Switch? Read More »
Warmup offers an extensive range of electric floor systems compatible with all floor types, rooms and projects.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)
