Warmup Floor Heating Full Quotation Form

Please enter a room name to easily identify which heaters and accessories go with each room.

Please select here the heating system that you would like to install in each room. You can use the final floor surface as a guide for your selection as the options are listed by heater and floor type. Here is a quick guide:
Warmup Foil Heating System: Used under Carpet/Vinyl/Wood/Laminate.
Warmup Matting System: The easiest and fastest way to install underfloor heating under tile/ stone surfaces.
Warmup Loose Wire System: To be used under tile/stone. Ideal to heat small and irregular shaped rooms where it may be more difficult to install a matting system.
For more information visit this link to find out which floor heating system is right for you.

This is the net area to be heated. We say "net area" because you should not heat under fixed objects such as a wardrobe, cabinet or a bath etc. For example, in the image on the right the grey area is the net heated area.

This is usually the total area of the room. This is because usually, even if you are not heating some parts of your room, you will use insulation for the whole room to maintain floor levels. In the diagram shown you may require insulation for both the red and grey area to maintain floor levels or if the fixtures are already in place you might only require insulation for the grey area.

Please select whether you want to include insulation on your quote or not. Warmup highly recommends installing underfloor heating in conjunction with insulation boards as it improves heat up times and reduces costs significantly. For more information please visit our page about underfoor heating insulation.